Every asset, on one audit trail.
Pointnode is where your inspection records, condition data, and lock-out controls live together. One database, one signed-off history, one place to point an HSE inspector when they ask.
Customer logoCustomer logoCustomer logoThree different systems, one WhatsApp group, and a paper folder.
Industrial operators run compliance on three different systems and a WhatsApp group. LOLER PDFs in a Dropbox folder, pre-use checks on paper in the cab, condition data nowhere or trapped in a vendor portal. When something goes wrong — or the HSE inspector arrives — the paperwork is somewhere, but not here.
The HSE inspector is here Tuesday. The PDF is in a Dropbox folder nobody can find, named "scan_001.pdf".
Paper forms get signed and forgotten. There's no way to physically stop someone using a crane that failed inspection.
A generic "fault active" alert lands at 4pm. By the time you reach the depot the operator has cleared it and gone home.
Three products on one asset, one billing line, one audit trail.
Pointnode replaces the spreadsheet with a database, the paper check with a tap on an iPad, and the vendor portal with an open platform that doesn’t care which PLC you bought.
Records
Every LOLER thorough examination, PUWER inspection, wire-rope check, and service report on the right asset — with the PDFs attached, the next-due dates calculated, and reminders before they slip. Bring an HSE inspector to the screen.
- LOLER · PUWER · wire-rope cadences out of the box
- Records kept for the legally-required retention period
- Green / amber / red compliance pill per asset, fleet-wide
Guard
If your operator's pre-use check fails, the crane physically can't start. Not a sticker, not an incident report — a real interlock at the on-crane controller. Pass the check and the crane unlocks. No platform outside a Konecranes service contract does this.
- iOS pre-use checks — signed off, filed, audit-trailed
- Lock-out sent direct to the on-asset controller — no override
- One open lockout per asset — no stacking, no confusion
Monitoring
See your asset's health before it breaks. Live runtime, lift counts, fault patterns, contactor wear — the signals that tell you when to plan maintenance, not react to a failure. The same data backs your next LOLER inspection.
- Plan maintenance from runtime + cycle data, not the calendar
- Set thresholds, name your alarms, route notifications to the right person
- Dashboards configurable per asset — different for a hoist vs a dipping crane
No surprises when your insurer asks.
Every action — every record, every lockout, every staff login — lands in an audit log that even Pointnode’s own engineers can’t tamper with without leaving evidence. Your data is isolated from every other customer at the database itself, not just the app. Every release ships a software bill of materials your security team can audit at /sbom.json.
The schema doesn’t care if it’s a crane or a galv-bath.
Multi-vertical from day one. Only the inspection regime and the widget pack differ. We lead today with craneIQ (LOLER, pre-use, condition data). galvIQ and others ship on request — no platform rebuild needed.
Read your fleet in three seconds.
A clean dashboard the site manager can read at a glance — compliance pill per asset, named alarms, live readings.
Per asset, per year, in pounds.
No per-user fees, no per-datapoint dots, no six-figure entry. Annual prepay, net-30, single anchor renewal, prorated on asset add.
Up to 30 publishes/s, 100 distinct metrics. Low-rate assets.
Up to 60 publishes/s, 250 distinct metrics. Most cranes.
Up to 120 publishes/s, 600 distinct metrics. Multiple subsystems.
Pre-use checks tied to physical interlock. Tier depends on fleet size.
Full breakdown — Records add-on (£100/yr), Records-only (£150/yr), Connectivity tiers, Managed Remote Access — on the pricing page.
See full pricingTwenty minutes on a video call.
We’ll create your org, walk you through filing a real LOLER PDF against one of your cranes, and if you don’t see the difference, we both have our afternoons back.